Concrete Polishing Adelaide - Polished SA
Polished SA handles residential and commercial floors from first grind to final seal, including polishing, honing, toppings and colour sealing. Consistent finishes, straightforward pricing, and a crew that turns up when they say they will.
- Licence BLD 317629
- Service Area Adelaide & SA
- Hours Mon–Fri, 7am–5pm
One Crew, Every Stage Of The Floor
Most jobs move through the same stages: grinding to open the surface, honing through progressively finer diamond tooling, and sealing to lock the finish in. We run every one of those stages ourselves, so the aggregate exposure agreed on at quote stage is what actually shows up on the day of the pour, driveway, or warehouse floor.
We work on new slabs, tired driveways, and floors that just need a topping or a reseal. If a job calls for grinding and full stone exposure, we grind. If it just needs a clean and colour seal to look presentable again, we do that instead and won’t sell you a bigger job than the floor needs.
Finishes We Grind, Polish And Seal
Every floor is different, so the right process depends on the slab, the traffic it takes, and the finish you want to see. Here is what each service actually involves.
Mechanical Polish
Diamond grinding, honing and polishing through progressive grits, finished with a penetrating sealer for a hard, glossy, low-maintenance floor.
View Mechanical Polish →Burnish
A surface-level polish with no stone exposure, mechanically finished or topically sealed, for a smooth uniform look at a lower cost.
View Burnish →Grind and Seal
Ground to your chosen stone exposure and sealed in matte, satin or gloss, a durable option for driveways, garages and alfresco areas.
View Grind and Seal →Concrete Micro Toppings
A high-strength micro topping laid over existing concrete, tiles or timber from 3mm, then polished or sealed to a finish of your choice.
View Concrete Micro Toppings →Honed
A smooth, even matte grind that suits outdoor entertaining areas and pool surrounds where a non-reflective, slip-friendly surface matters.
View Honed →Clean and Colour Seal
Cleaning and colour sealing for tired driveways, paths and pavers, refreshing old concrete without a full grind.
View Clean and Colour Seal →How A Project Runs
-
01
Site Assessment And Quote
We look at the existing slab or surface, talk through how the space is used, and put together a written quote that names the finish, the sealer, and the timeframe.
-
02
Preparation And Grinding
Where grinding is part of the job, we work through bonded diamond tooling in stages, opening the surface to the aggregate exposure agreed at quote stage.
-
03
Honing, Colour Or Topping
Depending on the service, this stage is fine honing for a polished floor, colour application for a seal job, or laying a micro topping over the existing surface.
-
04
Sealing And Handover
A topical or penetrating sealer is applied to suit the finish, and we walk you through basic care before we leave, so the floor holds up to daily use.
Ready To Talk About Your Floor?
Tell us about the space and we’ll come back with a straightforward quote, no obligation.
Get In Touch